Thursday, January 15, 2009

The best thing in the world :)


Mmm..... a fresh batch of chenille scarves right out of the dryer.

It's one of the joys of weaving that I always seem to forget about and just about melt when I pick up that luscious armful, so warm and soft.

I'll cut them apart this evening (the three scarves are still attached to each other so I have to cut the fringe to separate them, don't worry I'm not going to be chopping them to bits or anything) and hopefully list at least one tomorrow.

On another note, after 2 years of aggravation caused by my ridiculously slow computer the problem was finally solved and it actually works like a normal computer! Apparently when windows Vista first came out the computers didn't have enough ram to support it, for example my computer had .4gigs of ram whereas it needed 2 to function normally. Computer services at school told me this last week, I went online, ordered 2 gigs of ram, it cost $22, it came yesterday, and they installed it today. So easy! I had no idea it was so cheap and easy to fix, way better than throwing my computer out the window and buying a new one (which I had been tempted to do too many times to count.)

Sunday, January 11, 2009

How to: Felted Soap



Felted soaps have been one of my best selling items, probably due to a combination of several facts- they're fun, extremely functional, make great gift, unusual, and less expensive than anything else in my store.

For a while I've been planning on putting together a tutorial on how to make them so that you can all give it a try! I will try to explain everything in a way that someone who has never felted before can understand. Also, if there is anything you don't understand please ask me questions and I would be happy to add that information in.

First off for those of you who are thinking "ok, that's nice, but what on earth is felted soap??" here's the basic description that I include in my etsy listings-
"Felted soap functions as a built in washcloth and gently exfoliates while creating a lovley lather. Just wet, rub a little to get sudzy and use! As the soap is used up the felt casing will shrink with it until it gets very small allowing you to use every last bit as well extending the life of your soap. Once the soap is gone you will be left with a small, great smelling, felt pouch that can be cut open and used to put something special in, or kept as a shower scrubby to use with the other fabulous handmade soaps from etsy."

The basic idea behind wet felting is that agitation, hot water, and soap cause the wool fibers to tangle more and more tightly together and eventually become a solid piece of felt. Felted soap is a great introduction to wet felting because the soap is already part of it, and it is a small project so it goes relatively quickly and you can get the feel for felting before going on to bigger projects.

I would recommend starting out making only one at a time, until you get the hang of it. I usually do 3 or 4 in a sitting but then my hands get so soaplogged (you know how your fingers get all shriveled up and waterlogged when you've been swimming for too long? it's like that but you have soap in your fingers) that I can't stand it any more and need to take a break. The funny part about that is the next time you go to wash your hands they're already soapy.

Let's get started!



You will need:
-a towel
-wool (I use merino because it is the softest and also wet felts more quickly than other types)
-a bar of soap
-hot water (in a bowl, or a squirt bottle)
-(optional) a piece of rubber or plastic mat




Lay the plastic mat on top of the towel (if you don't have a rubber mat
I would reccommend doing this on a plastic table top or some
other surface that won't be damaged by water.


Step 1: (skip if you only have one color of wool)
lay out little wispy bits of wool in the pattern and color that you want, if you would like a really specific design lightly needle felt it together first but only enough that it stays put. I like to play with color in more abstract designs and see what happens.




Step 2:
Begin drafting out THIN strips of wool vertically (I usually use all one color at this point, but you can certainly keep using as many colors as you want) make an even layer in a square about 4 or 5 inches on each side for a normal bar of soap, if it's smaller or larger compensate for that size difference by making the area that you are laying wool out a bit bigger or smaller.

Step 3-5:

Lay out wool in the same manner going horizontally, then diagonally one way and then diagonally the other way. Pat it, it should have an even thickness and not show through to the mat/table in any places, it should be a bit poofy, but not super thick. Then put an extra horizontal piece and vertical piece in the center. The reason for going all different directions is it gives the wool more places to tangle, the barbs on the individual strands of wool all go the same direction so if you lay them against each other facing opposite ways they will snag on eachother more readily.































Step 6:
Ok, now plop your soap diagonally in the middle.






And start to fold in the corners one at a time


















Wrap it up like a nice little present.






If there is a color that you like that's being covered up, just pull it out from underneath and lay it lightly over the top wherever you want it.






Now flip your nice little package over so that the weight of the soap holds the folded pieces in place. Check to make sure there are no thin spots where the soap shows through, if there are, unwrap it and fill in those places with more wool.

Now you're ready to start felting!





Step 7 (I think, yeah, we'll just call it 7):
Get your bowl of HOT water. Not so hot that you burn yourself,
but close.






Drip water onto the top of the soap, if you have a squirt bottle you can just squirt a little out.












Pat gently.







Using your other hand to cup the side, drip water on each side, patting gently afterward.









What you are trying to do right now is to get all of the
wool just a little bit wet.



Once you have wet the top and sides flip the soap over, the water should have pooled enough to wet the underside. Pat gently. If there is a lot of water pooled around the soap, dump some back into the bowl.








Continue to work your way around the bar patting all sides DO NOT RUB! Rubbing at this point could cause bits to stick up and become "dread locks" or pull the wool away from parts causing holes where the soap sticks out.






Keep patting... spend at least 10 minutes patting your first time, eventually you will learn to recognize when you're ready for the next step and it may take less time. This step is the felting part, you are making all the different layers of wool stick together.





After a while it will change, you'll know what I mean, see how different the texture looks in the picture? It will also have shrunk a bit around the soap so that it is more fitted to the shape of the bar.




Step 8: Fulling, I couldn't get any good pictures of this because I was using both hands and they were covered in soap suds so hopefully I can explain well enough.
Fulling is the final step to felting where you agitate the wool and it shrinks and becomes more solid. Before this step you can still pull off the fiber without too much trouble if you wanted to, after it you would need scissors or a lot of patience to rip it open.

I usually do this part near a sink because it can get kind of messy and you have the hot and cold right there. Otherwise, get a bowl/bottle of really hot water and one of cold water. The temperature change helps make the fulling process go faster because it opens and closes the scales of the wool. Also, rinsing in cold water at the end helps get the suds out of the wool casing.

Begin by wetting with hot water and rub very gently someone once told me to rub it like it was a baby bunny, I think that's a good motivation for just how gently you should rub at first if you rub hard you could still pull it apart or create dreads. Use a circular motion and try to rub equally on all sides. As it gets soapy rinse it off in alternating hot and cold water, you should feel it start to tighten up after a few minutes, as it does you can rub harder, rotating it around in your hands. If you have a washboard or something textured you can rub it against that for extra agitation.

When you think it's done, keep going, just a bit longer.




Final rinse in cold water, squeeze dry in a towel and place in a well drained place to dry, I use a dish drying rack.






TA DA! Felted soap!

Have fun and I'd love to see pictures of what you make :)

Oops

So I've been ignoring this blog...

but no more!

I will be starting my senior project tomorrow and have been thinking this would be a great venue to record my progress and show off all of the pretty things I'll be making.